Search
Search Results
-
Polyol process: Combined modification and assessment of morphological changes in PEMFC bimetallic catalysts at all stages of research
This study proposes using the modified polyol synthesis method to obtain state-of-the-art bimetallic catalysts for PEMFCs. One-step and multi-step...
-
Polyol-mediated synthesis and characterization of magnesium–aluminum spinel nanoparticles
MgAl 2 O 4 spinel nanoparticles were successfully synthesized using the polyol-mediated process. The study focused on the use of aluminum nitrate and...
-
Optimizing silver nanowire synthesis: machine learning improves and predicts yield for a polyol, millifluidic flow reactor
This study highlights optimizing polyol reaction conditions to produce 100% silver nanowire (AgNW) yields (AgNWs count/all nanostructure count) using...
-
Comparison of the (photo)catalytic efficiency of Ag/Fe nanocomposites prepared by polyol synthesis and laser ablation
Two different synthesis approaches were used to prepare silver/iron oxides nanocomposites: the polyol synthesis and laser ablation. The...
-
AgNPs/lignin-aminated polyol/polyvinyl alcohol sponges as efficient recyclable catalysts for organic pollutants degradation
In this study, lignin-aminated polyol (LAP) was synthesised and used to enhance the anchor capability of polyvinyl alcohol (PVA) sponges for silver...
-
Microwave-assisted polyol synthesis of V–ZrSiO4 nanoparticles and its use as a blue ceramic pigment
AbstractIn this study, a microwave-assisted polyol technique was used to synthesize vanadium-containing nanopigments of ZrSiO 4 . The influence of...
-
CoNi Nanoparticles with Different Compositions Using a Polyol Method for a Microwave Absorber in High-Frequency Bands
AbstractMicrowave absorbers are utilized to reduce electromagnetic interference, which causes device malfunctioning. A superior microwave absorber...
-
Novel polyol(acrylic)-isocyanate-based 2k-polyurethane coatings with embedded nanocomposite matrix for corrosion inhibition application
The present study demonstrates a scalable polyurethane technology based upon a nanocomposite matrix to synthesize high-performance anticorrosion...
-
Polyol Method for Synthesis of Nanomaterials
Polyol method is a widely used synthesis technique for the preparation of large number of inorganic compounds ranging from metal nanoparticles to...
-
Electromagnetic shielding performance of reduced graphene oxide reinforced iron oxide nanostructured materials prepared by polyol method
The relative shielding effectiveness (SE) of Fe 3 O 4 –rGO NC (nanocomposite) in the X-band frequency region is reported. The Fe 3 O 4 –rGO NC with different...
-
Water-soluble fullerene derivatives: the inhibition effect on polyol pathway enzymes and antidiabetic potential on high-fat diet/low-dose streptozotocin-induced diabetes in rats
Water-soluble pentaamino acid fullerene (C 60 ) derivatives (PFD) are promising nanomaterials with a wide range of biomedical applications. The present...
-
Influence of biobased polyol type on the properties of polyurethane hotmelt adhesives for footwear joints
Polyurethanes, one of the most used polymers worldwide, are strongly dependent of non-renewable fossil resources. Thus, boosting the production of...
-
Study of Various Approaches to the Synthesis of PtCo/C Electrocatalysts for Fuel Cells
A comparative analysis of different methods for the bimetallic PtCo/C fuel cells electrocatalysts synthesis was carried out. The structure and...
-
Melamine-based polyol containing phosphonate and alkynyl groups and its application in rigid polyurethane foam
AbstractThe rapid depletion of energy resources is the most serious challenge facing humanity today. Energy consumption by buildings is the largest...
-
Improved thermoelectric figure of merit in polyol method prepared (Cu7Te4)1−x(MnTe2)x (x ≤ 0.06) nanocomposites
This paper describes the synthesis, characterization and thermoelectric properties of (Cu 7 Te 4 ) 1− x (MnTe 2 ) x ( x = 0, 0.04 and 0.06) nanocomposites...
-
Antioxidative copper sinter bonding under thermal aging utilizing reduction of cuprous oxide nanoparticles by polyethylene glycol
Durability of sintered Cu joints under thermal aging in the air was investigated for the reduction of Cu 2 O using Cu 2 O/polyethylene glycol (PEG)...
-
Enhanced thermoelectric properties of (SnS)1−x(SnO)x: x ≤ 10.79% nanocomposites prepared by polyol method
(SnS) 1− x (SnO) x : x = 0, 3.57%, 7.16%, and 10.79% nanocomposites (NCs) have been successfully synthesized using a simple polyol method. XRD data...
-
Comparative optical sensing studies of silver nanowires prepared by different synthetic routes
The silver nanowires (AgNWs) have been synthesized by two different methods: polyol and hydrothermal. The X-ray diffraction analysis (XRD) revealed...
-
Antioxidative metallic copper nanoparticles prepared by modified polyol method and their catalytic activities
In this study, antioxidant copper nanoparticles (CuNPs) were prepared by the modified polyol method using polyvinylpyrrolidone (PVP) and L -ascorbic...
-
Effect of solvents and dispersants on polyol synthesis of V–ZrSiO4 nanopigment stable suspension for ink application
The polyol method was implemented to prepare stable V–ZrSiO 4 suspensions as ceramic ink. It was shown how the rheology, surface tension, viscosity,...
